Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The address of the CBSU/GOBII dockerized Galaxy is  is  http://cbsugobii01galaxy-demo.tc.cornell.edu:8085/

1)      Click on the “Get Data” menu link placed at the left side:

Image Removed

2)      Click on the “Upload File from your computer” tool link:

 Image Removed

 

3)      Push the “Choose local file” button:

Image Removed

4)      You can choose two (typical) or more data files to upload. Push the “Start” button. The “Status” column will show how the upload(s) are progressing. If they finish by any file type as ”.csv”, for example, it is automatically detected after its upload being done. We are using two files: Test_Grain_PhenotypeforrAmpSeq.csv and GenotypesForGS.csv

Image Removed

5)      Once such two csv data files being successfully uploaded and identified, click on the “Close” button:

Image Removed

6)      The new data are shown at the right side and they are disposed to be used by BGLR. Now click on the “GOBII Tools” menu link placed at the left side:

Image Removed

 

7)      Click on the “Bayesian Generalized Linear Regression calculator” tool link:

Image Removed

8)      You can see the input values of the “Bayesian Generalized Linear Regression calculator” (BGLR) tool:

Image Removed

9)      Choose one of the two csv data files, Test_Grain_PhenotypeforrAmpSeq.csv, for the first file input value, “Input Phenotype File”:

Image Removed

 

10)   The following five input values are already filled with their values by default, verify them:

Image Removed

11)   Roll the screen down until getting the “Incidence Matrix and Model” as the first row and push its button associated, “+ Insert Incidence Matrix and Model”:

Image Removed

12)   Choose the second and last csv data file, GenotypesForGS.csv, for the second file input value, “GenotypesForGS” and Fixed for the “Model” input value:

Image Removed

13)   The following four input values are already filled with their values by default, verify them:

Image Removed

14)   Roll the screen down until getting the “SaveAt” input value as the first row and verify all the six input values shown that they are filled with their values by default:

 Image Removed

15)   Roll the screen down until getting the “Groups Vector Colum” input value as the first row and verify that the last two input fields are filled with their values by default:

Image Removed

Note that we are using no cross validation now. There are the other cross validations available: “K-Fold Cross Validation” and “Leave-p-out (LPO)”. Each one of these two ones have its own input values by default. Also, there is online documentation below describing each one of all the input values:

16)   We are done with entering all the input values! Now push the “Execute” button:

Image Removed

17)   There should be three rolling icons appearing in the right side. Give them about a half minute and three new output data (generated) should appear in the right side:

Image Removed

18)   Click on the “Eye” icon of the first link placed on the right side and the output data is numerically shown in the CSV format:

Image Removed

19)   Click on the “Eye” icon of the second link placed on the right side and the output data is graphically shown in the PDF format:

Image Removed

20)   Click on the “Eye” icon of the third link placed on the right side and the output data is graphically shown in the PNG format:

Image Removed

Download output results

1)      Click on the “Bayesian Generalized Linear Regression on data 1 and data 2” output data link placed at the left side:

Image Removed

2)      Click on the diskette icon to begin the download of the BGLR output data in the CSV format:

Image Removed

3)      Once the download being done, the BGLR output data is available in your Downloads folder depending on the Internet browser you are using:

Image Removed

4)      Repeat the steps 1) and 2) to download the same BGLR output data but in the PDF or PNG format in the Downloads folder:

excellenceinbreeding.org/


Tutorial with Test Datasets

...